Manuals / Brands / Computer Equipment / Printer / Casio / Computer Equipment / Printer

Casio CW-L300 TAPE Mode, PRINT, Important, Recommended Action, Recommended Action

1 78

Download 78 pages, 1.06 Mb

Symptom	Possible Cause	Recommended Action
I cannot	A tape cartridge is	A disc cannot be inserted into
insert a	loaded in the printer.	the printer while a tape
disc into		cartridge is loaded. Remove
the printer.		the tape cartridge and replace
		it with an ink ribbon cassette.
		(Startup Guide, page 11)

Printing will	The disc is not	Remove the disc and then re-
not start.	positioned correctly in	insert it straight into the left
	the printer.	side of the slit along the top of
		the printer. (Startup Guide,
		page 20)

TAPE Mode

	Symptom	Possible Cause	Recommended Action
	The printing	The tape is used up.	Replace the tape cartridge
	operation is		with a new one.
	finished
	normally,
	but nothing
	is printed.

	Printing is	The tape cartridge is	Re-load the tape cartridge
	not clear.	not loaded properly.	properly.
	Printing is
	Printing is	The print density	Adjust the print density to
	poor	The print density	Adjust the print density to
	poor	setting is too light.	make it darker.
	quality.	setting is too light.	make it darker.
	Printing is
	too light.

	No tape	The cassette cover is	Close the cassette cover.
	comes out	not closed completely.	(Startup Guide, page 5)
	when I
	when I	The tape is used up.	Replace the tape cartridge
	press	The tape is used up.	Replace the tape cartridge
	press		with a new one. (Startup
	PRINT.		with a new one. (Startup
	PRINT.		Guide, page 13)
			Guide, page 13)

		The tape is jammed.	Remove the tape cartridge and
			pull out the jammed tape. Use
			scissors to cut off the tape you
			pulled out. Load the tape
			cartridge back into the printer.
			(Startup Guide, page 13)
			Important!
			Note the following while
			printing is in progress.
			• Do not allow the tape outlet
			to become blocked.
			• Do not touch the tape
			coming out of the printer.
			• Do not open the cassette
			cover.
			• Do not turn off the printer.

61E

Contents

RJA514733-10 NOTICE •Reorient or relocate the receiving antenna •Increase the separation between the equipment and receiver •Consult the dealer or an experienced radio/TV technician for help FCC WARNING Read This First Safety Precautions Danger Alkaline Batteries 1.Do not rub your eyes! Rinse them with water 2.Contact your physician immediately Leaving alkaline battery fluid in your eyes can lead to loss of sight Dropping and rough treatment Do not disassemble or modify the product Water and foreign objects Do not incinerate Plastic bag precaution Connection precaution Keep backup copies of all important data Keep heavy objects off Location Avoid unstable surfaces Operating Precautions Contents Creating Disc Label Data Built In Logos Output Samples Example 1: Aligning the term “Round Estimate1” in a block (fixed block length) Example 2: Aligning blocks within a tape label Specifying the Size of a String of Characters Specifying the Size of Text Lines Demo Printing DISC Mode TAPE Mode Part 1 - DISC Mode Disc Printing Terms DISC Mode Creating a New Label 5.Press SET ■Label Formats If you want to do this: Select this type of format: Input text only FORMAT 1 through FORMAT Inserting a Logo Into a Label Inputting Text into an AUTO Format Specifying Character Spacing Specifying Text Alignment Printing Disc Case Labels 4.Use and to select PRINT, and then press SET 5.Use and to select TAPE, and then press SET •Pressing and toggles the selection on the above screen between DISC and TAPE To print this data: Upper label area Part 2 - TAPE Mode Creating a Tape Label Creating and Printing a Sequentially Numbered Tape Label Input the text for the COMMENT 1 box, and then press 7.Change the starting number, if you want, and then press SET 8.Input the text for the COMMENT 2 box, and then press SET •Here we will input “Receipt” Controlling the Appearance of Your Labels •Direction (horizontal or vertical) •Mirror printing (off or on) •Margin size See page 25 for information about how to configure these settings Creating and Printing a Large Tape Label Creating and Printing a Tape Label with a Logo ■To create and print a label with a logo 5.Use the cursor keys to select the logo you want to use, and then press SET Creating and Printing an Original (Free Design) Tape Label FREE DESIGN: Using Text Blocks FREE DESIGN: Using Multiple Lines in a Tape Label 1.In the Free Design Mode, input the first line of text • Here we will input “New Branch” 2.Press The newline mark indicates a newline operation Other Tape Label Examples Insert block mark (page 22) Specify different character sizes for each line (page 31) FREE DESIGN: Configuring Block Form Settings FREE DESIGN: Configuring Label Form Settings ■To configure label form settings 1.In the Free Design Mode, input the text you want 2.Press FORM FORM FREE DESIGN: Controlling the Length of a Tape Label Fixed Block Length and the Label Format Indicator FREE DESIGN: Aligning Tape Label Text AUTO Example 2: Aligning blocks within a tape label ■To align blocks within a tape label B-ALIGN FREE DESIGN: Changing the Size of Tape Label Text Specifying the Size of a String of Characters ■To specify the size of a string of characters SIZE HEIGHT WIDTH Specifying the Size of Text Lines Example: LINE Small Font FREE DESIGN: Using Frames Creating a Barcode Tape Label Barcode Specifications Barcode Check Printed Number Using Tape Labels ■FULL+HALF CUT ■FULL CUT •FULL CUT performs a full cut at the end of each label •Use this setting when printing on iron transfer tape When using the Cut Modes and Margins Part 3 - Inputting and Editing Label Text Moving the Cursor Basic Alpha Numeric Input Inputting Symbols and Special Characters Inputting Illustrations Deleting an Individual Character Clearing Input Text Text Editing Using Phrase Memory To edit a phrase memory record EDIT To delete a phrase memory record DELETE Using Copy and Paste User Characters Do this: ■To create a user character using an existing character 2.Press FUNCTION and then USER CHR USE INPUT CHAR ■To create a user character using user character you created previously To recall a user character USER CHR RECALL To delete a user character Part 4 - Controlling the Appearance of Text Selecting a Font To change the default font setting 2.Use and to select DEFAULT FONT and then press SET To change the font of text you have just input 1.After inputting the text you want, press FONT 2.Use and to select the font you want to change to and then press SET Using STYLE Menu Attributes Using EFFECT Menu Attributes Part 5 - Saving, Recalling and Deleting Labels Part 6 - Configuring the Printer Setup ■To configure the printer setup 2.Press FUNCTION and then SET UP 4.Use the cursor keys to change it When this setting ■To perform tape demo printing CONT HALF CUT Reference Power Requirements Caring for the Printer Troubleshooting DISC Mode TAPE Mode PRINT setting to NARROW, MEDIUM FULL CUT or UNCUT setting to CONT HALF CUT or FULL+HALF CUT Error Messages LOW BATTERY • Battery power is low ➜ Replace the batteries or use the bundled AC adaptor to power the printer Page Page (from NARROW to MEDIUM Illustrations Symbols, Dingbats, and Special Characters Frames Disc Label Formats Numbering Formats Tape Width and the Number of Lines and Character Sizes Supported Tape Widths Enlarged Label Printing Tape Widths and Character Sizes Specifications Page 6-2, Hon-machi 1-chome Shibuya-ku,Tokyo 151-8543,Japan