Casio CW-L300 SET, WIDE, WIDE, MEDIUM, FULL CUT, See page:, See page:, (from NARROW to MEDIUM

Message	Cause and Action	See page:
TOO MANY	• You are trying to copy text	47
CHARACTERS!	that contains more than 49
SOME WERE NOT	characters.
COPIED	➜ Decrease the number of
	characters you are copying.
TOO MANY	• Pasting copied text will cause	47
CHARACTERS!	the number of characters to
SOME WERE NOT	exceed the allowable limit for
PASTED	the location where you are
	pasting.
	➜ Re-input so the pasted text
	does not cause the allowable
	number of characters to be
	exceeded.
TOO MANY LINES TO	• Printing with a frame will	35
FRAME!	cause your label to have
	more than the allowable
	number of lines.
	➜ Decrease the number of lines
	or change to a wider tape.
TOO MANY LINES!	• You are trying to print a label	23
	that has more than the
	allowable number of lines.
	➜ Decrease the number of lines
	or change to a wider tape.

Message	Cause and Action	See page:
TOO SHORT TO CUT!	The unused tape at the	26, 38
SET/ESC	beginning of a numbering label
	cannot be cut or cutting
	between labels is not possible.
	• To print without cutting, press
	SET.
	After printing is complete,
	use scissors to cut the labels.
	• To print with auto cutting,
	change the settings to
	increase the margin width
	(from NARROW to MEDIUM,
	or from MEDIUM to WIDE).
	Left and right margins can
	auto cutting can be ensured
	by selecting FULL CUT for
	the tape cut mode and WIDE
	for the margins setting.

67E