10.Use 
and 
to select the print area you want to print, and then press SET.
11.Insert a disc into the printer.
12.Press SET to start printing.
•Both DATA 1 and DATA 2 print in both the upper print area and the lower print area of the disc.
13.After printing is complete, use 
and 
to select EXIT, and then press SET.
14.In response to the confirmation message that appears, press SET.
■To perform tape demo printing1.Make sure a tape cartridge is loaded in the printer.
•See page 13 for the Startup Guide for information about loading tape cartridges.
2.If the printer is on, press 
to turn it off.
3.Press 
to turn on the printer.
4.Press FUNCTION and then SET UP.
5.Use 
and 
to select DEMO PRINT, and then press SET.
6.Use 
and 
to select TAPE, and then press SET.
7.Use 
and 
to select PRINT, and then press SET.
8.Confirm that 1 is specified for the number of copies and CONT HALF CUT is specified for the tape cut mode.
•You can change the number of copies and the tape cut mode (page 38) settings if you want.
•If you are using a
9.Press SET to start printing.
•The demo print contents depend on the width of the tape cartridge currently loaded in the printer.
10.After printing is complete, use 
and 
to select EXIT, and then press SET.
11.In response to the confirmation message that appears, press SET.
E56