Casio CW-L300 ■To create a user character using an existing character, ■To create a user character using user character you created previously, SET, SET, SET, SET, SET

4.Use the following operations to draw the character you want.

To do this:			Do this:
Move the cursor	Use the cursor keys.
Make the cursor jump to the left, right,	Press FUNCTION followed
top or bottom of the drawing screen	by	,	,	, or	.
Draw a black dot	Press 1 so BLACK is
	highlighted on the display.
Draw a white dot	Press 2 so WHITE is
	highlighted on the display.
Draw a line of black dots	Press 1 and 3 so BLACK
	and CONTINUE are
	highlighted on the display,
	and then use the cursor
	keys to move the cursor.
Draw a line of white dots	Press 2 and 3 so WHITE
	and CONTINUE are
	highlighted on the display,
	and then use the cursor
	keys to move the cursor.

•Note that you can draw and delete straight lines only. You cannot draw and delete diagonal lines. To create a diagonal line, you need to input each of its dots, one-by-one.

•Each press of 3 while BLACK or WHITE is highlighted toggles the CONTINUE setting on (highlighted) and off (unhighlighted).

5.After you are finished drawing the character you want, press SET.

6.Use the cursor keys to select the user character area where you want to store the character, and then press SET.

7.In response to the confirmation message that appears, press SET to store the character.

■To create a user character using an existing character

1.Input the character or symbol you want to use as a basis for your new character and locate the cursor under the character.

2.Press FUNCTION and then USER CHR.

3.Use and to select MAKE and then press SET.

4.Use and to select USE INPUT CHAR and then press SET.

5.Perform steps 4 through 7 under “To create a user character from scratch” to create and save the new character.

■To create a user character using user character you created previously

1.Press FUNCTION and then USER CHR.

2.Use and to select EDIT and then press SET.

3.Use the cursor keys to select the character you want to use as the basis for your new character and then press SET.

4.Perform steps 4 through 7 under “To create a user character from scratch” to create and save the new character.

E48