Casio DT-930 manual General Guide, Left side, Front, Right side, Bottom, E-19

General Guide

Left side Front Right side Back

	1
	2
	3
4	4
	5

77

Bottom

7	7
14

1

8

9

6

10

1211

13

1	Reader port	Emits a laser for bar code reading.
2	Read indicator	Indicates the status of the read operation: green for a successful
		read, red when the read is no good.
3	LCD screen	Displays various data when a program is being run.
4	Trigger keys	Executes the bar code read operation.
5	Stroke keys	A total of 26 keys are provided to turn power ON and OFF and for
		other operations.
6	Reset switch (inside the hole)	Use a paper clip or other thin object to press the RESET switch
		located inside the hole.
7	Wrist strap hook	Used to install the wrist strap.
8	Laser warning label	Class 2 laser warning label.
9	Buzzer	Outputs operation confirmation tones. Take care to avoid blocking
		the buzzer holes and reducing output sound volume. Never insert
		any thin, pointed object into the buzzer holes. Doing so can cause
		malfunction.
10	Back-up battery compartment	Holds memory backup lithium battery.
11	Main battery compartment	Holds main batteries.
12	Main battery compartment lock	Locks the main battery compartment cover in place. Handheld
		Terminal power is automatically cut if the cover is removed.
13	Power Contacts	These terminals are used to supply power from either Bridge Basic
		Cradle, Basic Cradle, Satellite Cradle, or Cradle-type Battery Charger.
14	IR port	This port is for IR communication with another DT-930 unit or with
		one of the optional cradles.

E-19