Using the Basic Cradle
When You Are Using the
When you are using a
screws using a screwdriver.
Setting up the Basic Cradle
Use only the dedicated AC adaptor for Basic Cradle to connect to an electrical outlet.
Be sure to connect the AC adaptor and then turn on the power on the Basic Cradle before performing any communication with the Handheld Terminal.
Power is supplied to the Handheld Terminal by the cradle.
1 Remove the two desktop guides, L and R, installed on the cradle by sliding them toward the rear side as shown in the illustration.
2 Insert the desktop guides, L and R, one at a time that were accompanied with