1 | AC adaptor jack | For connection of the AC adaptor to supply power | |
2 | Nose Guide | Remove this guide when you are using the | |
|
| port model. | |
3 | Terminal detection switch | Detects whether or not the Handheld Terminal is mounted correctly | |
|
| on the | |
4 | Spare battery pack charge | Indicates the charge status of a spare battery pack installed in the | |
| indicator ("CHG 2") | spare battery compartment. | |
|
| Off: | Not charging, or a battery pack problem |
|
| Lit Red: | Charging (charging standing by when the battery in the |
|
|
| Handheld Terminal is charging) |
|
| Lit Green: Charging complete |
5Battery pack charge indicator ("CHG 1")
Indicates the charge status of the
Off: | Not charging (e.g. |
| Handheld Terminal) or a battery pack problem |
Lit Red: | Charging |
Lit Green: | Charging complete |
6 | Power indicator | Indicates whether power is ON or OFF, and if the Handheld | |
| ("READY/POWER") | Terminal is mounted. | |
|
| Off: | Power OFF |
|
| Lit Red: | Power ON, Handheld Terminal not mounted |
|
| Lit Green: Power ON, Handheld Terminal mounted | |
7 | Desktop guides (L, R) | Holds down the Handheld Terminal on the | |
|
| Charger that is placed on a flat surface in desktop configuration. | |
8 | Charge/Power supply terminals | Supplies power to the Handheld Terminal mounted on the Cradle- | |
|
| type Battery Charger. | |
9 | Battery pack charge terminals | Charges the spare battery pack separately. | |
10 | Power switch | Turns power ON and OFF. | |
11 | Base | Reverses the position of the base when | |
|
| type Battery Charger. | |
12 | Wall mounting holes | Use these holes to attach the | |
|
| on a wall. |
|