Charging the Battery Pack
The following procedure can be used only when a
1 Turn on the power of the Satellite Cradle, and confirm that its power indicator lights up red.
2 Attach the Handheld Terminal to the Satellite Cradle, making sure that the charge terminals on the bottom of the Handheld Terminal come into contact with the charge terminals on the Satellite Cradle. The color of the Satellite Cradle power indicator changes to green when proper connection is achieved. The charge indicator (“CHG 1”) lights up red when charging starts.
Battery Pack Charge Indicator (“CHG 1”)
Lit Red: | Charging |
Lit Green: | Charging complete |
When the charge indicator lights red and then goes out after several seconds, this indicates a battery problem.
Charge terminals |
Power |
switch (ON) |
System operation indicator |
Data communication indicator |
Spare battery pack charge |
indicator (“CHG 2”) |
Battery pack charge indicator |
(“CHG 1”) |
Power indicator |
Charging Time
Approx. 6 hours
[Caution]
■Ambient Temperature Ranges for the Battery Pack
•Temperature ranges for battery pack use in the Handheld Terminal, charging, and storage are specified below. Temperatures outside these ranges create the danger of deterioration of battery pack performance and shortening of its service life, as well as fluid leakage and heat generation.
Operating Temperature:
Charging Temperature: 0°C to 40°C
Storage Temperature:
Important! • If the charge indicator does not light during charging, remove the battery pack and then
•Use only the specified battery pack.
•Battery packs naturally discharge even when they are not loaded in the Handheld Terminal. Use a battery pack as soon as possible after charging it.
•For best charging results, keep the Satellite Cradle, Handheld Terminal and battery pack contacts clean by periodically wiping them off with a cotton swab or dry cloth.