![Flow Control](/images/new-backgrounds/14844/14844111x1.webp)
Using the Satellite Cradle
DIP Switch Settings
The following table shows the various settings that are available with the DIP switches located on the back of the Satellite Cradle.
1 2 3 4 5 6 7 8 9 10
Flow Control
| 9 | 10 |
Off | OFF | OFF |
X ON/X OFF | ON | OFF |
RS/CS | OFF | ON |
Use Special Software | ON | ON |
Handheld Terminal - Satellite Cradle Communication Speed
| 1 | 2 |
38,400bps | OFF | OFF |
115,200bps | ON | OFF |
Satellite Cradle - Host Computer
Communication speed
| 6 | 7 | 8 |
2,400bps | OFF | OFF | OFF |
4,800bps | ON | OFF | OFF |
9,600bps | OFF | ON | OFF |
19,200bps | ON | ON | OFF |
38,400bps | OFF | OFF | ON |
57,600bps | ON | OFF | ON |
115,200bps | OFF | ON | ON |
*Communication speed can be set by Handheld Terminal overrides this setting.
Connection Type
| 3 | 4 | 5 | |
Host Computer | OFF | OFF | ON (No linking) | |
Connection | OFF (Linking) | |||
|
| |||
Intermediate Unit | ON | OFF | OFF | |
in Linked Chain | ||||
|
|
| ||
Terminator Unit | ON | OFF | ON | |
in Linked Chain | ||||
|
|
|
Important! • Other settings not shown here are used for