Casio DT-930 manual Setting up the Cradle-typeBattery Charger, E-60

Using the Cradle-type Battery Charger

When You Are Using the Down-facing Reader Port Model

When you are using a down-facing reader port model, remove the nose guide before use. To remove the nose guide, remove the two

screws using a screwdriver.

Setting up the Cradle-type Battery Charger

Use only the AC adaptor specified for use with the Handheld Terminal to connect to an electrical outlet. Be sure to connect the AC adaptor and turn Handheld Terminal power on before attempting to charge battery pack.

1 Remove the two desktop guides, L and R, installed on the charger by sliding them toward the rear side as shown in the illustration.

2 Insert the desktop guides, L and R, one at a time that were accompanied with DT-930 into each slit and then slide them toward the front side as shown in the illustration.

E-60