Casio DT-930 Connecting without Using the AC Adaptor, E-38, Setting up the Bridge Basic Cradle

Setting up the Bridge Basic Cradle

Connecting without Using the AC Adaptor

•It is possible to draw power from the personal computer in the bus power mode. This makes it possible to operate the Bridge Basic Cradle without using the AC adaptor.

•Power is not supplied to the DT-930 when the USB connection is used to supply power. Replace the batteries to transfer data if the low voltage message is displayed on the DT- 930. Also, use a personal computer that has USB connectivity that supports high-power devices.

•Some personal computers cannot provide a stable power supply, confirm whether your computer can provide a stable power supply. If it is unstable use the optional AC adaptor.

Important! • Mount the DT-930 firmly and make sure that the LED power indicator on the front of the Bridge Basic Cradle lights green. If it is not correctly mounted communication cannot be done.

•Do not allow the supply contacts in the Bridge Basic Cradle to short circuit. If they short circuit it may cause a malfunction.

•Do not shake or hit the Bridge Basic Cradle or DT-930 during communications over the USB interface. Doing so may interrupt communications.

•The infrared communication function uses a high-sensitivity communication element.

To ensure proper communication, avoid using devices that generate radio waves (for example; cell phones, etc.) in the vicinity of the DT-930 while communication is in progress.

Move these devices away from the DT-930 to use them (cell phones should be moved more than 30 cm away).

•The cradle does not have the capability of charging battery pack installed in DT-930.

•The cradle (HA-E60IO) is not operable with DT-900.

E-38