Configuring Power On Default Settings (Memory)
Procedure
[r] (REC) * [MENU] * REC Tab * Memory
This setting lets you specify which camera settings should be remembered by the camera when it is turned off, and restored the next time the camera is turned on. To have the camera remember a setting, you should enable the setting’s memory. Any setting whose memory is disabled will be reset to its initial default any time the camera is turned off.
Setting | Disabled (Initial Default Setting) | Enabled |
Flash | Auto |
|
|
|
|
Off |
| |
|
|
|
Flash Intensity | 0 | Setting at |
Digital Zoom | On | power off |
|
|
|
MF Position | Position before manual focus was selected. |
|
|
|
|
Zoom Position* | Full wide |
|
|
|
|
*Optical zoom setting only
Image Quality Settings (Quality)
Specifying Snapshot Image Quality (T Quality (Snapshot))
Procedure
[r] (REC) * [MENU] * Quality Tab * T Quality (Snapshot)
Fine | Gives image quality priority. |
Normal | Normal |
Economy | Gives the number of images priority. |
|
|
•The “Fine” setting helps to bring out details when shooting dense tree branches or leaves, a complex pattern, etc.
•Memory capacity (the number of images you can record) will be affected by the quality settings you configure (page 183).
101 | Advanced Settings |
|