.Precautions for Windows Users

•Except for Adobe Reader, the bundled software requires Administrator privileges to run.

•Operation on a self-made computer is not supported.

•Operation may not be possible under certain computer environments.

Viewing and Storing Images on a Computer

You can connect the camera to your computer in order to view and store images (snapshot and movie files).

.To connect the camera to your computer and save files

1.Turn on the camera and press [MENU].

2.On the “Set Up” tab, select “USB” and then press [6].

3.Use [8] and [2] to select “Mass Storage”, and then press [SET].

4.Turn off the camera and then use the USB cable that comes with the camera to connect it to your computer.

USB port

Large connector

Terminal cover

USB cable

USB/AV port

Small connector

Making sure that the 6 mark on the camera is aligned with the 4 mark of the USB cable connector, connect the cable to the camera.

•The camera does not draw power over the USB cable. Check the battery level before connecting and make sure it is not too low.

•Make sure that you insert the cable connector into the USB/AV port until you feel it click securely into place. Failure to insert the connector fully can result in poor communication or malfunction.

133Using the Camera with a Computer