13.Press [SET].

•The approximate number of recordable CS images will appear on the monitor screen.

Number of recordable CS images (If you are not performing Prerecord CS, the allowable continuous shutter time also is displayed.)

Remaining snapshot memory capacity

14.Half-press the shutter button.

This will cause the camera to start pre-recording images.

•The camera will not emit a shutter sound when you half-press the shutter button while Prerecord CS is selected.

•If you release the half-pressed shutter button before pressing it the rest of the way down, all of the pre-recorded images currently in the buffer will be deleted.

15.When you are ready to shoot, press the shutter button the rest of the way down.

This will record the images in the pre-record buffer and start recording new images in real-time. Images continue to be shot as long as you keep the shutter button depressed.

16.Real-time shooting will stop when you release the shutter button or after the maximum number of shots is reached.

17.Save the CS images (page 62).

IMPORTANT!

• You cannot use the Triple Self-timer in combination with High Speed CS.

61

Snapshot Tutorial