2.Use [8] and [2] to select “City” and then press [6].

To change the “World” setting to summer time, use [8] and [2] to select “DST” and then select “On”. Summer time is used in some geographical areas to advance the current time setting by one hour during the summer months.

3.Use [8], [2], [4], and [6] to select the geographic area you want and then press [SET].

4.Use [8] and [2] to select the city you want and then press [SET].

5.Press [SET].

IMPORTANT!

Before configuring World Time settings, make sure that the Home City setting is the place where you live or normally use the camera. If it isn’t, select “Home” on the screen in step 1 and configure the Home City, date, and time settings as required (page 151).

Specifying the File Name Serial Number Generation Rule (File No.)

Procedure

[MENU] * Set Up Tab * File No.

Use the following procedure to specify the rule that governs generation of the serial number used in file names (page 145).

Tells the camera to remember the last used file number. A new file will be named using the next sequential number, even if files are deleted or if a blank memory card is loaded. If a memory card is loaded and that

Continue card already has files stored on it and the largest sequential number in the existing file names is greater than the largest sequential number remembered by the camera, numbering of new files will start from the largest sequential number in the memory card file names plus 1.

Restarts the serial number from 0001 whenever all files are deleted or when the memory card is replaced with a blank one. If a memory card

Reset is loaded and that card already has files stored on it, numbering of new files will start from the largest sequential number in the memory card file names plus 1.

150

Other Settings (Set Up)