Continuous Shutter Precautions
•If there is not enough available capacity on the memory card, you may not be able to record the number of CS images indicated on the monitor screen. Make sure your memory card has sufficient remaining capacity before shooting with using continuous shutter.
•With continuous shutter, exposure and focus for the first image are applied for successive images as well.
•When using a continuous shutter mode, keep the camera still until shooting is finished.
•In the Continuous Shutter mode except the Flash CS mode, the flash setting automatically becomes ? (Flash Off).
•Zoom is disabled during continuous shutter operations.
•The following image sizes cannot be selected while shooting with High Speed CS or Flash CS: “RAW+”, “10M”, “3:2”, “16:9”. Entering the High Speed CS or Flash CS mode while any one of these image sizes is selected will cause the image size setting to change to “9M” automatically.
•The “RAW+” image size setting cannot be selected while shooting with Normal Speed CS. Entering the Normal Speed CS mode while the “RAW+” image size is selected will cause the image size setting to change to “10M”.
•The maximum number of images that can be recorded during each High Speed CS or Flash CS session is limited, regardless of how much memory card storage capacity is available.
High Speed CS | Up to 30 images |
Flash CS with flash | Up to 3 to 10 images |
|
|
The number of images will be restricted even further or shooting may be impossible when remaining memory card capacity is less than the allowable number of images for a particular CS mode.
•The Triple
•The
•When the flash is fired for Flash CS, the greater the number of images setting, the smaller the flash range (shooting range).
•With some BEST SHOT scenes, the current mode dial setting is ignored.
•When using Prerecord CS, if you release the
64 | Snapshot Tutorial |
|