.To setup the camera
1.In the REC mode, press [BS].
2.Select “Move Out CS” or “Move In CS” and then press [SET].
3.Press [SET].
4.Configure the boundary location and size settings.
[8] [2] [4] [6] Moves the boundary.
Zoom controller Resizes the boundary.
5. Press [SET]. | Boundary |
•If you want to reconfigure the settings, start again from step 3.
6.Press [2].
7.Use [8] and [2] to select the third control panel option from the bottom (High Speed CS fps).
8. Use [4] and [6] to select the continuous shutter |
|
|
|
|
| ||
|
| CS speed | |||||
| (CS) speed you want and then press [SET]. |
|
|
|
|
| |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| 1 to 40 fps | Enables specification of the number of |
|
|
|
|
|
|
|
|
|
|
| ||
| CS images recorded per second. |
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
9.Use [8] and [2] to select the second control panel option from the bottom (Max CS shots).
10.Use [4] and [6] to select the maximum number of shots for each continuous shutter operation and then press [SET].
11.Use [8] and [2] to select the bottom control panel option (Prerecord
CS shots).
84 | Using BEST SHOT |
|