Using Continuous Shutter
To use Continuous Shutter (CS), use the mode dial to enter the Continuous Shutter mode.
High Speed CS (page 
Using Flash Continuous Shutter
This mode will record consecutive images while firing the flash.
• You can select a CS speed of 1 image, 3 images, or |
| |
5 images per second. |
| |
• In this mode, you can specify consecutive recording of | Flash | |
three to 10 images. Recording will stop if you release | ||
| ||
the shutter button. |
|
1.Set the mode dial to ª (Flash CS).
2.Press ð (Flash up) to open the flash unit.
3.Use [8] and [2] to select the third control panel option from the bottom (Flash CS fps).
4. Use [4] and [6] to select the continuous | Flash Unit CS Speeds | |||
shutter (CS) speed you want and then press |
|
|
|
|
|
|
|
| |
[SET]. |
|
|
|
|
|
|
|
| |
*fps (frames per second) is a unit of measurement
indicating the number of images recorded or played back per second.
5.Use [8] and [2] to select the second control panel option from the bottom (Flash CS Images).
6.Use [4] and [6] to select the number of flash continuous shutter (CS) images you want to shoot and then press [SET].
You can select any one of the following values: 3, 5, 7, or 10.
56 | Snapshot Tutorial |
|