12.Use [4] and [6] to specify how many of the 30 images and for how long images should be pre-recorded in the buffer.

•You cannot set a value of “0” for the number of Prerecord CS buffer images.

 

 

 

Shutter button full-press

Number of pre-record

 

 

 

 

 

 

 

 

Number of remaining images

images and pre-record

 

 

 

 

 

 

 

 

and remaining recording time

time

 

 

 

 

 

 

 

 

after the shutter button full-press

 

 

 

 

 

 

 

13.Press [SET].

•The approximate number of recordable CS images will appear on the monitor screen.

Number of recordable CS images

Remaining snapshot memory capacity

14.Use [8] and [2] to select the fourth control panel option from the bottom (Trigger Sense).

15.Use [4] and [6] to select the subject movement sensitivity, and then press [SET].

•You can select any one of three sensitivity levels: “High”, “Normal”, or “Low”.

•Move Out CS Setting Guide

High : For a subject that moves out of the boundary quickly

Low : For a subject that moves out of the boundary slowly

•Move In CS Setting Guide

High : For a subject that moves into the boundary quickly or for a small subject (relative to the boundary)

Low : For a subject that moves into the boundary slowly or for a large subject (relative to the boundary)

.To shoot using Move Out CS

1.Compose the image so the subject is within the boundary on the monitor screen.

2.Half-press the shutter button.

•The camera will adjust exposure and focus automatically.

85

Using BEST SHOT