Shutter button half-press

Shutter button full-press

Shutter button release

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Recorded images (up to 30 images)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pre-recorded images

Continuous recording of images until shutter

 

 

 

 

 

 

 

button released*

*You can record up to 30 images (pre-recorded buffer images plus real-time images) for each Prerecord CS operation.

•You can specify 5, 10, 20, or 30 as the maximum number of shots for each continuous shutter operation.

•You can specify anywhere from 0.75 seconds up to 30 seconds as the continuous shutter shooting time, which is the amount of time of the pre-record buffer plus the amount of time that continuous shutter recording is performed after the shutter button is pressed all the way. The maximum shooting time depends on the selected CS speed. You can select a CS speed in the range of 1 to 40 fps.

40 images per second

You can shoot up to 30 images in 0.75 seconds.

(40 fps)

 

One image per second

You can shoot up to 30 images in 30 seconds.

(1 fps)

 

•You can configure the mode so up to 29 images are pre-recorded to the buffer until you fully press the shutter button.

•The minimum number of pre-recorded buffer images you can specify is one. Total recording time depends on the current continuous shutter frames-per-second (fps) setting.

•Specifying zero for the number of pre-recorded images disables Prerecord CS and performs High Speed CS only (without pre-recording).

1.In the REC mode, press [MENU].

2.Use [4] and [6] to select the “REC” tab.

3.Use [8] and [2] to select “CS” and then press [6].

4.Use [8] and [2] to select “High Speed CS”, and then press [SET].

59

Snapshot Tutorial