NOTE
•Note the following when selecting a High Speed CS speed (fps) setting.
–Use a higher High Speed CS speed (fps) setting when shooting a
–Use a slower High Speed CS speed (fps) setting when shooting a
•Note the following when selecting a High Speed CS maximum number of shots setting.
–The greater the number of shots, the longer it takes to save them after shooting is complete.
•Note the following when specifying a Prerecord CS shots setting.
–A setting that results in a Prerecord CS operation that takes at least 0.3 seconds is recommended because there is a minimal lag from about 0.1 seconds to 0.3 seconds between the point you decide to shoot and the point that the shutter button is fully depressed.
Specifying the Method for Saving Continuous Shutter Images
You can specify the method to use for saving images recorded with the following continuous shutter (CS) modes.
Flash CS, High Speed CS
1.In the REC mode, press [MENU].
2.Use [4] and [6] to select the “REC” tab.
3.Use [8] and [2] to select “Save CS Images”, and then press [6].
4.Use [8] and [2] to change the setting.
Normal (Batch)
All images that were shot are saved after the continuous shutter operation is finished.
62 | Snapshot Tutorial |
|