7.Press the shutter button to shoot.

8.If you keep the shutter button depressed, the camera will shoot the number of images you specified. Recording will stop if you release the shutter button before the specified number of images is reached.

9.Save the CS images (page 62).

IMPORTANT!

• You cannot use the Triple Self-timer in combination with Flash CS.

NOTE

•The back lamp flashes red while the flash is charging. You will not be able to perform further Flash CS shooting until charging is complete, which is indicated when the back lamp stops flashing and goes out.

•When shooting with Flash CS, there may be times when a message appears telling you to wait, because you have reached the limit of the flash. This is to protect the flash from damage. You will be able to resume using flash after the message disappears.

Using Normal Speed Continuous Shutter

The number of consecutive images you can shoot is theoretically unlimited, as long as there is memory available to store them. Also note that the maximum shooting speed of Normal Speed CS is limited by the type of memory card you are using and the camera setup.

1.In the REC mode, press [MENU].

2.Use [4] and [6] to select the “REC” tab.

3.Use [8] and [2] to select “CS” and then press [6].

4.Use [8] and [2] to select “Normal Speed CS”, and then press [SET].

57

Snapshot Tutorial