1.Use [8] and [2] to select the editing method you want to use and then press [SET].

2.Use the following operations to select the frame (point) from which or to which you want to cut the movie (the cut point).

During playback, changes the playback [4] [6] direction and playback speed. While

playback is paused, scrolls forward or back.

 

 

Cut range (yellow)

[SET]

Toggles between pause and play.

 

3.Press [2] to display the editing menu and specify one or two cut points.

 

}

Cut

While the frame you want the cut to be up to is

 

(To-Point Cut)

displayed, press [2].

 

 

 

1While the frame you want the first (From) cut to be is

 

 

Cut

displayed, press [2].

 

~

 

2Select another frame.

 

(Point-To-Point Cut)

 

3While the frame you want the second (To) cut to be

 

 

 

 

 

 

is displayed, press [2].

 

 

Cut

While the frame you want the cut to be from is

 

¡

 

(From-Point Cut)

displayed, press [2].

 

 

 

 

4.Use [8] and [2] to select “Yes” and then press [SET].

The selected cut operation will take considerable time to complete. Don’t try to perform any camera operation until the “Busy... Please wait...” message disappears from the monitor screen. Note that a cut operation can take a long time if the movie being edited is long.

IMPORTANT!

•When you edit a movie, only the result is saved. The original movie is not retained. An editing operation cannot be undone.

116Other Playback Functions (PLAY)