Power Management Problems
The computer does not enter Standby or Hibernation mode automatically.
If you have a connection to another computer, the computer does not enter Standby or Hibernation mode if the connection is actively in use.
Make sure that the Standby or Hibernation
The computer does not enter Standby or Hibernation mode immediately.
If the computer is performing an operation, it normally waits for the operation to finish.
The computer does not resume from Standby or Hibernation mode.
The computer automatically enters Standby or Hibernation mode when the battery pack is empty. Do any one of the following:
−Connect the AC adapter to the computer.
−Replace the empty battery pack with a fully charged one.
The computer does not enter Hibernation mode with the Fn+F10 hot keys.
Make sure that the Hibernation function is specified for the sleep button.
Software Problems
An application program does not work correctly.
Make sure that the software is correctly installed.
If an error message appears on the screen, consult the software program’s documentation for further information.
If you are sure the operation has stop, reset the computer. (See “Resetting the Computer” later in this chapter.)
Troubleshooting |
