Selecting and Playing a Tone

To specify the keyboard split point

1. While holding down the SPLIT button, press the keyboard key where you want the left limit of the high range (right) tone to be.

Low range

Flashing

Split point

High range

High range leftmost key

•This will change the split point and display the name of keyboard key that you pressed.

NOTE

•The split point also is the boundary between the accompaniment keyboard range (pages E-18 to E-21) and the melody keyboard range. Changing the location of the split point also changes the sizes of the keyboards.

•See “Other Settings” on page E-32 for information about another method you can use to change the split point.

Using Effects

Reverb. . . . . Makes your notes resonate. Chorus . . . . Adds more breadth to your notes.

To turn effects on and off

1. Use the REVERB and CHORUS buttons to turn the effects on and off as shown below.

•The lamps above the buttons show whether the effects are on or off.

Lit

OnOn

OffOff

Unlit

NOTE

•The chorus effect cannot be turned on while the digital piano is in the Duet Mode.

To change the effect type

1. Turn on REVERB or CHORUS.

2. While holding down the effect button (REVERB or CHORUS), use the T/NO and S/YES buttons to change the effect type as described below.

Reverb

•Reverb Settings

1:Room

2:Small Hall

3:Large Hall

4:Stadium

Chorus

•Chorus Settings

1:Light Chorus

2:Medium Chorus

3:Deep Chorus

4:Flanger (Whooshing effect)

NOTE

•While the keyboard is layered, the chorus on/off setting affects the layered tone only. While the keyboard is split, the chorus on/off setting affects the low range tone only.

E-13