Reference

Problem

Cause

 

Action

See Page

I can’t load data from

1. The card is not inserted properly into

 

1. Insert the card properly.

) E-42

an SD memory card.

the SD memory card slot.

 

 

 

 

2. The capacity of the SD memory card is

 

2. Use an SD memory card with a

) E-42

 

not supported by the digital piano.

 

supported capacity.

 

 

3. The SD memory card is damaged.

 

3. Use a different SD memory card.

 

 

4. When the data was copied to the SD

 

4. Move the data to the “MUSICDAT”

) E-47

 

memory card from a computer, it was

 

folder.

 

 

copied to a folder other than

 

 

 

 

“MUSICDAT”.

 

 

 

 

 

 

 

 

Playback stops part

Digital noise from the USB cable or power

 

Stop song playback, disconnect the USB

) E-38

way through while

cord caused data communication your

 

cable from the digital piano, and then

 

transferring song

computer and digital piano to be

 

reconnect it. Next, try playing back the

 

data from my

interrupted.

 

song again.

 

computer.

 

 

If this does not solve the problem, quit the

 

 

 

 

MIDI software you are using, disconnect

 

 

 

 

the USB cable from the digital piano, and

 

 

 

 

then reconnect it. Next, restart the MIDI

 

 

 

 

software and then try playing back the

 

 

 

 

song again.

 

 

 

 

 

 

“E-A” appears on the

Built-in flash memory is corrupted.

 

Contact your nearest CASIO Service

—

display immediately

 

 

Center.

 

after power is turned

 

 

 

 

on.

 

 

 

 

 

 

 

 

A tone’s quality and

This is an unavoidable result of the digital sampling process,* and does not indicate malfunction.

volume sounds

* Multiple digital samples are taken for the low range, middle range, and high range of the original

slightly different

musical instrument. Because of this, there may be a very slight difference in tonal quality and volume

depending where it is

between sample ranges.

 

 

played on the

 

 

 

 

keyboard.

 

 

 

 

 

 

When I press a

Selecting some tones or functions automatically changes internal effect settings that are unique the

button, the note that

tone being used, which can cause such phenomena. This is due to the limitations of the digital piano’s

is sounding cuts out

system, and does not indicate malfunction.

 

 

momentarily or there

 

 

 

 

is a slight change in

 

 

 

 

how effects are

 

 

 

 

applied.

 

 

 

 

 

 

Even though I play on

The ranges of certain tones are limited, which means that octaves change normally up to a certain low

different ranges of

note or high note. With such a tone, the notes of the lowest octave will be repeated to the left of the

the keyboard, the

lowest possible note, and the highest octave will be repeated to the right of the highest possible note.

notes do not change

This is due do limitations in the range of the original musical instrument for each tone, and does not

octaves.

indicate malfunction of the digital piano.

 

 

 

 

 

 

 

E-50