Recording and Play Back
7. When you are finished, press the START/ STOP button to stop recording.
•To stop recording with a rhythm/Auto Accompaniment ending pattern, press the INTRO/ ENDING button.
•Stopping recording will cause the REC lamp to go out and the PLAY lamp to light.
•To play back the track you just recorded, press the START/STOP button again.
8.After you are finished recording or playing back, press the RECORDER button so the
PLAY lamp and REC lamp are off.
To record to one track of a song while listening to the playback of the other track
1. Press the RECORDER button so the PLAY lamp is lit.
2. Use the T/NO and S/YES buttons to display a song number (1 to 5).
This indicator appears when the track contains recorded data already.
3. Press the RECORDER button so the REC lamp is flashing.
•This will cause the 1/L lamp to flash.
4.Use the TRACK/PART button to select the track to which you want to record.
•Make sure that the lamp for the record track is flashing.
Example: To listen to playback of Track 1 as you record to Track 2
Lit: Playback standby Flashing: Record standby
5. Select the tone and effects you want to use for your recording.
6. Press the START/STOP button or play something on the keyboard to start simultaneous playback from Track 1 and recording to Track 2.
•This will start both playback of the recorded track and recording to the other track.
7.When you are finished, press the START/ STOP button again to stop recording.