Recording and Play Back

Using the RECORDER Button

Each press of the RECORDER button cycles through the recording options in the sequence shown below.

Playback

Record

Normal

Standby

Standby

 

Lit

Flashing

Off

Recording Your Keyboard Play

After recording to either of the tracks of a song, you can record to the other track while listening to playback what you recorded in the first track.

To record to a specific track of a specific song

1. Press the RECORDER button so the PLAY lamp is lit.

2. Use the T/NO and S/YES buttons to display

a song number (1 to 5).

3.Press the RECORDER button so the REC lamp is flashing.

4. Use the TRACK/PART button to select the track to which you want to record.

•Make sure that the lamp for the record track is flashing.

Track 1: 1/L lamp

Track 2: 2/R lamp

NOTE

•If you want to record with rhythm or Auto Accompaniment, select Track 1 (1/L lamp flashing).

5. Select the tone and effects you want to use in your recording, and set the tempo you want. If you are recording to Track 1, you also can select a rhythm and accompaniment mode.

• Tone (page E-10)

Track 1 only

•Reverb and chorus (page E-13)

•Tempo (page E-17)

•Rhythm (page E-17)

•Mode (page E-18)

NOTE

•If you want the metronome to sound while you are recording, configure the beats per measure and tempo settings, and then press the METRONOME button. See “Using the Metronome” on page E-14 for more information.

6. Start playing something on the keyboard.

• Recording will start automatically.

NOTE

•When recording to Track 1 with rhythm or Auto Accompaniment:

Press the START/STOP button to start recording. You also can start recording by pressing the SYNCHRO/ FILL-INbutton and/or the INTRO/ENDING button, and then play a chord.

•When recording to Track 1 without rhythm or Auto Accompaniment:

Recording will start as soon as you play anything on the keyboard.

•At this time the 1/L lamp also will flash to indicate that the digital piano is standing by for recording to Track 1.

E-29