Other Settings

To change the setting of one of the EFFECT button parameters

Press the EFFECT button in step 3 of the “To configure other settings” procedure to toggle between the two parameters shown below.

Brilliance parameter

(“b” stands for “brilliance”.)

Acoustic Resonance parameter (“A” stands for “acoustic”.)

To change the setting of one of the MIDI button parameters

Press the MIDI button in step 3 of the “To configure other settings” procedure to cycle between the parameters shown below.

Send Channel setting (“C” stands for “channel”.)

Accomp MIDI Out setting (“o” stands for “out”.)

To change the setting of one of the OTHERS button parameters

Press the OTHERS button in step 3 of the “To configure other settings” procedure to cycle between the parameters shown below.

Pre-count setting

(“P” stands for “pre-count”.)

Soft/Sostenuto pedal jack setting (“J” stands for “jack”.)

Damper pedal adjustment (half-damper) setting (“H” stands for “half”.)

Registration Filter setting (“F” stands for “filter”.)

Setup Memory setting (“S” stands for “setup”.)

Operation Lock setting (“L” stands for “lock”.)

MIDI In Chord Judge setting (“J” stands for “judge”.)

Local Control setting (“L” stands for “local”.)

E-33