Using an SD Memory Card 
Formatting an SD Memory Card
Use the procedures in this section to format an SD memory card.
IMPORTANT!
•When using an SD Memory card, first be sure to format the memory card on the digital piano.
•Before performing the procedure below, check to make sure that the SD memory card does not contain any data you might need.
•The SD memory card format performed by your digital piano is a “quick format”. If you want to completely delete all of the data on the card, format it on you computer or using some other device.
PREPARATION
•Insert the SD memory card you want to format into the digital piano’s SD memory card slot. Make sure that the
To format an SD memory card
1. Press the FUNCTION button.
•This will cause the button’s lamp to flash.
2.Press the CARD button.
•This will cause “For” (format) to flash on the display.
3.Press the S/YES button to start formatting.
•“PLS” (please wait) remains on the display while the formatting operation is performed. Never try to perform any other operation on the digital piano while the memory card is being formatted. The message “CPL” (complete) will appear on the display to let you know when the format operation is complete.
zTo cancel the format operation, press the T/NO button in place of the S/YES button in step 3.
Saving Recorded/Registration Data to an SD Memory Card
You can save song data that you recorded in the digital piano’s recorder area or registration data you saved to the registration area to an SD memory card. Song data also can be converted to SMF format 0 for storage.
PREPARATION
•Insert an SD memory card that has been formatted on the digital piano into the digital piano’s SD memory card slot. Make sure that the
IMPORTANT!
•Never turn off the digital piano or perform any other operation while data is being saved to an SD memory card. Doing so can cause SD memory card data to be deleted and make impossible to store data to the card.
To save recorder area data
1. Press the RECORDER button so the PLAY lamp is lit.
2. Use the T/NO and S/YES buttons to display the song number (1 through 5) of the song you want to save.
3. Hold down the CARD button until its lamp starts to flash slowly and “Ldr” (load recorder area) appears on the display.
4. Press the CARD button again.
•This will cause the CARD button lamp to flash at a higher speed and “SvC” (save as CSR file) to appear on the display. This setting will save song data in CASIO CSR format.
•If you want to save the song data in SMF Format 0, press the CARD button again. This will cause “SvS” (save as SMF0 file) to appear on the display.