Saving Digital Piano Setups (Registration Memory) 
To recall a setup from registration memory
1.
2.
3.
Press the TONE/REGISTRATION button so
the registration lamp is lit.
•This will cause the currently selected bank number to appear on the display.
•Each press of the button toggles between the upper lamp and lower lamp.
Use the T/NO and S/YES buttons to display the number of the bank that contains the area you want to recall.
Press the area button (1 through 12) for the area whose registration data you want to recall.
•The lamp of the applicable area button will light after recall is complete.
Example: After data has been recalled from area
NOTE
•Registration data cannot be recalled when any one of the following conditions exists. Eliminate the problem condition and perform the procedure from step 1.
•The digital piano is in the Duet Mode.
•RECORDER button PLAY lamp is flashing.
•To check the current selected song or rhythm number while a bank number is on the display, press the RHYTHM, MUSIC LIBRARY button or CARD button.