Playing Back Built-in Songs

Playing Back a Specific Music Library Song

The Music Library includes both built-in songs (01 to 60), plus up to 10 songs (61 to 70) that have been saved to digital piano memory from a computer* or SD memory card (page E-41). You can use the procedure below to select one of these songs and play it back.

*You can download music data from the Internet and then transfer it from your computer to digital piano memory. See “Expanding the Selections in the Music Library” on page E-40 for more information.

1. Press the MUSIC LIBRARY button so the lamp below the button is lit.

•Each press of the button toggles between the upper lamp and lower lamp.

•This will cause the currently selected song number to appear on the display.

2.Find the song number of the song you want to play in the Song Llist on page A-5.

3.Use the T/NO and S/YES buttons to select a song.

4.Press the PLAY/STOP button.

•This starts the playback of the song.

•The measure number appears on the display during playback.

Measure number

•To view the song number during playback, hold down the MUSIC LIBRARY button.

•While playback is in progress, you can press the

T/NO and S/YES button to change to another song.

5. Press the PLAY/STOP button again to stop playback.

•Playback will stop automatically when the end of the song is reached.

NOTE

•You can change tempo, volume, and pre-count settings for playback. See “Other Settings” on page E-32 for more information.

To skip back through a song

1. While playback is in progress, hold down the REW button.

•This skips back through the song measure-by- measure.

•The measure number appears on the display while you are skipping back.

Measure number

2. When you reach the point you want, release the REW button to resume playback.

NOTE

•Depending on what is being played when you press the REW button, the skip back operation may not start right away when you press.

E-23