Recording and Play Back 
To play back from digital piano memory
1. Press the RECORDER button so the PLAY lamp is lit.
2. Use the T/NO and S/YES buttons to display a song number (1 to 5).
NOTE
•When a song has something recorded in both tracks, you can turn off one track and play back just the other track, if you want. Whether a track is on or off is indicated by the lamps above the TRACK/PART button. Each press of the TRACK/PART button cycles through the different possible track on/off settings.
3. Press the START/STOP button.
•This starts playback of the song and/or track you selected.
NOTE
•You can change the tempo setting as a track is playing.
•You cannot change the tone setting during playback.
•Press the START/STOP button again to stop playback.
To delete a specific track
IMPORTANT!
•The procedure below deletes all of the data of the selected song. Note that the delete operation cannot be undone. Check to make sure you really do not need the data before you perform the following steps.
1. Press the RECORDER button so the PLAY lamp is lit.
2. Use the T/NO and S/YES buttons to display a song number (1 to 5).
3. Press the RECORDER button so the REC lamp is flashing.
4. Use the TRACK/PART button to select the track you want to delete.
•This will cause the lamp of the selected track to flash.
5.Hold down the RECORDER button until “dEL” (delete) appears on the display.
6.Press the S/YES button.
•This will delete the selected track and enter record standby.
•To cancel the operation, press the T/NO button in place of the S/YES button.
NOTE
•All digital piano operations except for the RECORDER button and the T/NO and S/YES buttons are disabled from step 5 until the delete operation is executed in step 6 of the above procedure.