Casio QT-2100 1-2.How to initialize QT-2100terminal (add/replace one QT-2100)

1-2. How to initialize QT-2100 terminal (add/replace one QT-2100)

Preparation:

Operation:

1.All peripheral devices and QT-2100 terminals of this cluster should be turned off.

2.Connect all of the peripheral devices (such as printer, display etc.) to this QT-2100 terminal.

3.Connect this QT-2100 terminal to inline.

4.Turn on all peripheral devices of this QT-2100 terminal. And turn on all QT-2100 except this terminal of the cluster.

5.Turn on this QT-2100 terminal with pressing the left-most key of the top row and release the key after buzzer sounds.

6.After releasing the key, enter “2000” (U.S.)/“1000” (other area) and press the <ST> key.

7.Enter the current date (YY/MM/DD order) and time and press the <YES> key.

8.In ID character field, the auto-defined ID No. is shown. Please check if the same value is set in this field.

We recommend that you should not change the value.

9.In this field, you can select “1. Master/2. Backup Master/3. Satellite/4.Selfmaster.”

Please choose former options and press the <YES> key.

10.In this field, the check cluster No, should be set, if your check tracking system are divided in some clusters.

(Enter cluster No. “1” ~ “9”, if you use check cluster system.)

QT-2100 Programming Manual

P-11