Casio QT-2100 Operation:, Preparation:, 1-1.How to initialize QT-2100terminal

Initialization

1. Machine Initialization

1-1. How to initialize QT-2100 terminalPreparation:

Operation:

Date		00-00-00
Time
ID
	Date		01-10-10
	Time		12:34 00
	ID Character		MC #01
	Check System		Master
	Check cluster ID		0
	R/J/Order Printer(1)		UP-350
	R/J/Order Printer(2)		UP-350
OK?	R/J/Order Printer(3)		UP-350
	Slip Printer		SP-1300
	OK?		YES

Date	01-10-10
Time	12:34 00
ID Character	MC #01
Check cluster ID	0
Check System	Master
R/J/Order Printer(1)	UP-350
R/J/Order Printer(2)	UP-350
R/J/Order Printer(3)	UP-350
Slip Printer	SP-1300
OK?	YES

Date	01-10-10
Time	12:34 00
ID Character	MC #01
Check cluster ID	0
Check System	Master
R/J/Order Printer(1)	UP-350
R/J/Order Printer(2)	UP-350
R/J/Order Printer(3)	UP-350
Slip Printer	SP-1300
OK?	YES

1.All peripheral devices and QT-2100 terminals of this cluster should be turned off.

2.Connect all of the peripheral devices (such as printer, display etc.) to QT-2100 terminal.

3.Connect all QT-2100 terminals by inline.

4.Turn on all peripheral devices of a QT-2100 terminal.

5.Turn on this QT-2100 terminal with pressing the left-most key of the top row and release the key after buzzer sounds.

6.After releasing the key, enter “2000” (U.S.)/“1000” (other area) and press the <ST> key.

7.Enter the current date (YY/MM/DD order) and time and press the <YES> key.

8.In ID character field, the auto-defined ID No. is shown. We recommend that you should not change the value.

9.In this field, the check cluster No, should be set, if your check tracking system are divided in some clusters.

(Enter cluster No. “1” ~ “9”, if you use check cluster system.)

P-8