4-1-5 Programming the general feature
Operation
Machine Feature
Machine Feature
1.Pulldown Group |
|
2.Set Menu Table |
|
3.Arrangement |
|
4.Batch X/Z |
|
5.General Feature |
|
6.Scheduler |
|
7.Check Print |
|
8.Table Analysis | v |
0.00
4. Select “5. General Feature” and press the <YES> key.
4-1-5-1 Programming the machine control 1
General Feature
General Feature
1.Machine Control1 2.Machine Control2 3.Machine Control3 4.Machine Control4 5.Print Control 6.Report Control1 7.Report Control2
8.Communiction v
0.00
5. Select “1. Machine Control1” and press the <YES> key.
Machine Control1
| Machine No. |
| 0 |
| Order of Date | DD/MM/YY | |
| Add Mode | Add2 | |
| Reset consecutive number to |
|
|
| initial value after taking |
|
|
| daily fixed totallizer report |
| No |
| Initial value for consecutive |
|
|
| number | 0 | |
| Country Rounding | None | |
| Tax System |
| VAT |
| Disable to amount tender in RF |
| v |
|
| 0.00 | |
Machine Control1
| Country Rounding |
| None |
| Tax System |
| VAT |
| Disable to amount tender in RF |
|
|
| /REG- mode |
| YES |
| VLD compulsory & Drawer Open | At Once | |
| |||
|
|
| |
| Maximum value of left most |
|
|
| digit (0 to 9) | 0 | |
|
|
| |
| Number of Zeros (0 to 9) | 0 | |
|
| 0.00 | |
6.Select the field you want to change and press the <YES>/ <NO> key or enter the numeric value and press the <YES> key.
7.After programming, you should press the <ESC> key to return to the previous menu.
Field meaning
1.Machine number: (0 - 9999)
Not the ID code but the printing machine number.
2.Add mode:
You can choose Add 2 (ex. dollar and cent), Add 0 (ex. Japanese yen) or Add 1.
3.Reset the consecutive No. to initial value after taking daily fixed totalizer report: Consecutive No. starts preset value +1. (Initial consecutive number: 1 - 999999.)
4.Country Rounding:
You can choose None, IF1, IF2, Danish, Norwegian/Swedish, Singapore.
5.Tax systems:
You can choose VAT/US/Canada/Singapore tax system.
6.VLD compulsory and drawer open:
You can choose “At once” and “After compulsory.”
7.
You can enter “Maximum value of