Casio QT-2100 4-2-5-4Programming function control 1 by range

4-2-5-4 Programming function control 1 by range

Operation

Range

Operation

1.Clerk Control 2.Menu Shift/2nd@ 3.Mode Control 4.Allowed function 1 5.Allowed function 2 6.Allowed function 3 7.Allowed function 4 8.Allowed function 5 v

0.00

5. Select “4. Allowed function 1” and press the <YES> key.

Allowed function 1			Allowed function 1			Allowed function 1
Cash		YES	Table Transfer		YES^	Received on Account		YES^
Charge		YES	Tip		YES	Paid Out		YES
Check		YES	Normal Receipt		YES	Pick Up		YES
Credit		YES	Loan		YES	Coupon		YES
New Balance		YES	Received on Account		YES	Deposit		YES
Price Inquiry		YES	Paid Out		YES	Minus		YES
Stock Inquiry		YES	Pick Up		YES	% Minus		YES
Operate Character Recall		YES	Coupon		YES	Plus		YES
Character Print		YES	Deposit		YES	% Plus		YES
Check Print		YES	Minus		YES	Refund		YES
Clerk Transfer		YESv	% Minus		YESv	Coupon2		YES
	0.00			0.00			0.00

Allowed function 1

Enter Start range		0
End	range	0
OK?		YES

6.Select an appropriate record and press the <YES>/<NO> key.

7.After programming, press the <ESC> key to proceed to the next step.

Allowed function 1

Enter Start range		1
End	range	99
OK?
		YES

0.00 0.00

8.Enter the start range No. and press the <YES> key. (It starts “0001” if you skip to enter the start range.) Then enter the end range No. and press the <YES> key. (It ends the last record if you skip to enter the end range.)

9.Press the <YES> key.

10.Press the <ESC> key to return to the previous menu.

QT-2100 Programming Manual P-97