Initialization

1-3. How to flag clear QT-2100 terminal (or INIT2)

Preparation:

 

 

 

 

 

 

 

1.

All peripheral devices and this QT-2100 terminal should be

 

 

 

 

 

 

turned off.

 

 

 

2.

Check the connection of all peripheral devices (such as

 

 

 

 

 

 

printer, display etc.) of this QT-2100 terminal.

 

 

 

3.

Check the connection of this QT-2100 terminal to inline.

Operation:

 

 

 

 

 

 

 

 

 

4.

Turn on all peripheral devices of this QT-2100 terminal.

 

 

 

 

 

10-10-01 12:34

 

 

5.

Turn on this QT-2100 terminal with pressing the right-most

 

 

 

 

 

 

 

 

 

 

 

key of the top row and release the key after buzzer sounds.

 

 

 

 

6.

After releasing the key, press the <ST> key.

 

 

INIT

 

 

 

 

 

 

 

 

 

1.Flag Clear

 

 

 

 

 

 

2.INIT2

 

 

 

 

 

 

 

 

 

 

 

0.00

7.Select “1. Flag Clear” and press the <YES> key. The flag clear operation is finished.

Note:

Performing “Init 2” requires password “8888888888” .

P-14