Casio QT-2100 4-2-5-6Programming function control 3 by range

4-2-5-6 Programming function control 3 by range

Operation

Range

Operation

1.Clerk Control 2.Menu Shift/2nd@ 3.Mode Control 4.Allowed function 1 5.Allowed function 2 6.Allowed function 3 7.Allowed function 4 8.Allowed function 5 v

0.00

5. Select “6. Allowed function 3” and press the <YES> key.

Allowed function 3

Operator X/Z		YES
Tray Total		YES
Subtotal		YES
Receipt on/off		YES
TAST		YES
Operator Number		YES
MDST		YES
X		YES
X/For		YES
X/XX		YES
X/XXX		YESv
	0.00

Allowed function 3

X/XX		YES^
X/XXX		YES
Ketten Bon		YES
Selective Item ST		YES
New Check		YES
Old Check		YES
New/Old Check		YES
Add Check		YES
Separate Check		YES
Clock-in/out		YES
Break-in/out		YES
	0.00

Allowed function 3

Enter Start range		0
End	range	0
OK?		YES

6.Select an appropriate record and press the <YES>/<NO> key.

7.After programming, press the <ESC> key to proceed to the next step.

Allowed function 3

Enter Start range		1
End	range	123
OK?
		YES

0.00 0.00

8.Enter the start range No. and press the <YES> key. (It starts “0001” if you skip to enter the start range.) Then enter the end range No. and press the <YES> key. (It ends the last record if you skip to enter the end range.)

9.Press the <YES> key.

10.Press the <ESC> key to return to the previous menu.

QT-2100 Programming Manual P-99