Casio QT-2100 4-1-5-9Programming the hourly sales, 4-1-5-10Programming the slip/guest

Program 3

4-1-5-9 Programming the hourly sales

Operation

	General Feature
	General Feature
	9.Hourly Sales	^
	10.SLIP / Guest
	11.Journal Control
	12.Message Control
	13.Order Control
	14.Set Menu/Condiment
	15.CHK Tracking
	16.Clerk Interrupt	v
		0.00
	Hourly Sales
Interval(Hours)			1
Interval(Minutes)			0
Start Time(Hour)		0
Start Time(Minute)		0
		0.00

Field meaning

1. Hour (00 ~ 23)

2. Minute (00 ~ 59)

5. Select “9. Hourly Sales” and press the <YES> key.

6.Select the field you want to change and press the <YES>/ <NO> key or enter the numeric value and press the <YES> key.

7.After programming, you should press the <ESC> key to return to the previous menu.

4-1-5-10 Programming the slip/guest

Operation

General Feature

General Feature

9.Hourly Sales	^
10.SLIP / Guest
11.Journal Control
12.Message Control
13.Order Control
14.Set Menu/Condiment
15.CHK Tracking
16.Clerk Interrupt	v

0.00

5. Select “10. SLIP/Guest” and press the <YES> key.

SLIP / Guest

Print additional items only

Entire memory
Slip Auto Line Find	NO
Slip Maximum Lines	0
Maximum number of automatic
line feed	0
Item consolidation on slip/
Guest receipt	NO
Printing only Group TTL on slip/
Guest receipt	NO
Print only Dept TTL on Slip/	v

0.00

SLIP / Guest

Guest receipt		NO^
Print detail in order of Dept/
Group on slip/Guest receipt	Total only
PRT GUEST sort detail w/o TTL		NO
Consecutive No. on slip/Guest
receipt	Print
Print Date on slip/Guest RCT	Print
Print Time on slip/Guest RCT	Print
Back feed after slip Print		NO
Back feed after VLD Print		NOv
	0.00

SLIP / Guest

Print detail in order of Dept/ ^

Group on slip/Guest receipt	Total only
PRT GUEST sort detail w/o TTL	NO
Consecutive No. on slip/Guest
receipt	Print
Print Date on slip/Guest RCT	Print
Print Time on slip/Guest RCT	Print
Back feed after slip Print	NO
Back feed after VLD Print	NO
Back feed after CHK-END/PRT	NO
	0.00

6.	Select the field you want to change and press the <YES>/
	<NO> key or enter the numeric value and press the <YES>
	key.
7.	After programming, you should press the <ESC> key to
P-50	return to the previous menu.