- Ensure motor does not protrude into drive-way install baseplate
with centre line 250mm off pillar centre.
- Fasten concrete anchors (44) to the baseplate (43) using the M10x45
bolts provided. Ensure that the bolts are well tightened.
- Position baseplate (43) with centre of single support stud (45) 105mm
from edge of gate (46). (This dimension assumes centre line of rack (47)
is 20mm from edge of gate).
8105mm
20mm
4545
4343 4747 4646
L
C
4444
4343
m
250m
4444
L
C
04 m
0 m
400mm
300mm
MECHANICAL MOUNTING DETAILSOption 2 - Set into concrete plinth