MECHANICAL MOUNTING DETAILS

Option 1 - Bolt down onto concrete plinth

-Ensure motor does not protrude into drive-way install baseplate with centre line 250mm off pillar centre.

-Position baseplate (43) with centre of single support stud (45) 105mm from edge of gate (46). (This dimension assumes centre line of rack (47) is 20mm from edge of gate).

-Using the baseplate as a template mark and drill the 4 mounting holes into the concrete for the four M10 x 95 expansion studs.

-Use two M12 plated nuts per expansion stud as spacers below the foundation plate.

-Secure the baseplate to the expansion studs using one M10 washer and nut per expansion stud.

43

47

46

45

105mm

20mm

C

L

6

Page 8
Image 8
Centurion CP72SR5 installation manual Mechanical Mounting Details, Option 1 Bolt down onto concrete plinth