3Com 3C892 manual Hardware Description and Installation

Placing a Call to a Previously Defined Destination				20
Call Routing While No Other Calls Are Connected					20
Call Routing While One Call Is Already Connected					21
Understanding Multilink PPP and BACP/BAP		21
What is Multilink PPP?	21
What is BACP/BAP? 21
Multilink PPP Configuration Options		22
Understanding Dynamic Bandwidth Allocation			22
Understanding VPNs and PPTP	23
23
Setting Up the Server Side of the Tunnel		23
Setting Up the Client Side of the Tunnel		23
For Windows Dial-Up Networking Users			24
Establishing a Tunnel via the ISDN LAN Modem				24

3HARDWARE DESCRIPTION AND INSTALLATION

Package Contents	25
Before You Install the ISDN LAN Modem			25
Front Panel LED Description		26
Back Panel Connector Description			27
Installing the ISDN LAN Modem 27
Before You Begin	27
Installing the ISDN Cable		28

Connecting to a 10BASE-T Ethernet Port 28

Connecting to Another Ethernet Hub		29
Before You Begin 29
Installing Analog Equipment	30
Installing the Power Cable	31
Wall Mounting the ISDN LAN Modem		31
Using Rubber Feet and Stacking Clips		32
32

4SETTING UP TCP/IP FOR WINDOWS AND MACINTOSH

	TCP/IP Setup Using Windows 98 and Windows 95 33
	TCP/IP Setup Using Windows NT 4.0	36
	TCP/IP Setup Using Mac OS 7.6 or later 39
	TCP/IP Setup Using Windows 3.11	40
	Setting Up TCP/IP Using MS TCP	40
41
5 CONFIGURING THE ISDN LAN MODEM
	Typical Configuration 43
	Before You Begin 43
	You Should Have Done This 43
	You Should Have This Information	44
	Determine Whether You Use Dynamic or Static IP Addresses		44
	Setting Up Your Computer If You Have a Static IP Address		45

iv