3Com 3C892 Restricting, Workstations from, Accessing Service Providers, Configuring Your LAN

		Restricting Workstations from Accessing Service Provider(s) 65
Restricting		If you want to restrict a workstation(s) on the LAN from accessing a service
Workstations from		providers(s), do the following.
Accessing Service
Provider(s)
	1	click Workstation Parameters from the ISDN LAN Modem home page.
	2	Select the workstation from which you want to limit access.
	3	Clear the check boxes located next to the names of the service provider(s) you
		want to restrict from accessing that service provider over the LAN.
	4	When finished, click Submit.
	5	Repeat the previous steps for additional workstation access restrictions.
		If you want to password protect the configuration profile of the ISDN LAN
		Modem, refer to “Locking and Unlocking the Configuration.”
Configuring Your LAN		This section describes how to configure the parameters of your LAN. (LAN refers to
Parameters		that section of the network comprising your ISDN LAN Modem and all the
		computers or other devices attached to it by means of Ethernet cabling.) This
		section describes the LAN parameters and then provides configuration steps.
Understanding LAN		The LAN Parameters window, shown in Figure 46, contains the following fields.
Parameters

Figure 46 LAN Parameters Window

Name

Displays the name for the ISDN LAN Modem. This name is used for DNS. For example, the name LANmodem is translated to its IP address 192.168.1.1.