34CHAPTER 4: SETTING UP TCP/IP FOR WINDOWS AND MACINTOSH

Figure 20 Select Network Component Type Dialog Box

3Select Protocol and then click Add.

The Select Network Protocol dialog box appears.

Figure 21 Select Network Protocol Dialog Box

4From the Manufacturers list box, select Microsoft, and then from the Network Protocols list box, select TCP/IP.

5Click OK.

6Select the Configuration tab.

The Network Configuration dialog box appears.

7Select TCP/IP and then click Properties.

If you have multiple TCP/IP entries, select TCP/IP for the Ethernet card associated with the ISDN LAN Modem.

Page 34
Image 34
3Com 3C892 manual Select Network Component Type Dialog Box