3Com 3C892 manual Isdn LAN Modem Factory C Defaults

ISDN LAN MODEM FACTORY C DEFAULTS

Table 13 ISDN LAN Modem Factory Defaults

LAN Parameters

LAN Modem IP Address*

Subnet Mask

DHCP Server

NetBIOS filtering

Voice Call Routing

Calls to Telephone 1

Calls to Telephone 2

Use Data Compression

Use NAT

Bandwidth on Demand

Connect/Disconnect Threshold for 2nd B channel

Connect Delay

Disconnect Delay

Supplementary Voice Services

Call Waiting

Caller ID Blocking

Flexible Calling which includes:

Call Conference, Hold, Drop, Transfer

Codes

Message Service for Voice Mail Distinctive Ringing

Data Call Timeout Values

Minimum Call Duration

Automatic Data Call Inactivity Disconnect

Manual Data Call Inactivity Disconnect

192.168.1.1

255.255.255.224 Enabled Disabled

Routed to Phone Port 1 only

Routed to Phone Port 2 only

No

Yes

60%

10seconds

20seconds

Enabled on port 1; Disabled on port 2

Disabled

Enabled on telephone number 1; Disabled on telephone number 2

Conference = 60; Transfer = 61; Drop = 62; Message Service = 63.

Disabled on both telephone numbers

Disabled on both telephone numbers

2minutes

30seconds

15 minutes

*The ISDN LAN Modem attempts to use this default IP address to communicate with the computer during initial configuration. If communication cannot be established initially, the ISDN LAN Modem will change its default IP address. If this occurs, the IP address will be different from the default shown here.