3Com 3C892 Flexible Calling, Be enabled on your second telephone number as well, Isdn LAN Modem

Flexible Calling 81

Flexible Calling	Flexible Calling (also known as Flexible Call Offering (FCO)) is an additional service
	added to your ISDN line to allow you to use voice features such as Call Conference
	(Three Way Calling), Hold, Drop, Transfer and Message Service on telephones
	connected to the ISDN LAN Modem’s phone ports. If you are not sure whether
	your ISDN line supports Flexible Calling, check with your telephone company.
	In some cases your telephone company may enable Flexible Calling on your first
	telephone number only. You may need to specifically request that these services
	be enabled on your second telephone number as well.
Configuring FCO on the	Once Flexible Calling is provided on your ISDN line, you can either enable or
ISDN LAN Modem	disable Flexible Calling (that is, all of the associated voice features) on the ISDN
	LAN Modem on a telephone number basis.
	By default, Flexible Calling is enabled on telephone number 1 and disabled on
	telephone number 2. If your ISDN line supports Flexible Calling only on the first
	telephone number, you should leave this default setting as is. If your ISDN line
	supports Flexible Calling on both telephone numbers, you may want to enable
	Flexible Calling on telephone number 2 so that you can use Call Conference and
	Call Transfer from telephones connected to either ISDN LAN Modem phone port.
	To enable or disable Flexible Calling, do the following.

1Go to the ISDN LAN Modem’s main configuration page (http://3com.oc.lanmodem/).

2Click ISDN Parameters.

3Next to Flexible Calling Enable, select the telephone number check box(es) for which you would like Flexible Calling enabled. Or, clear the telephone number check box(es) for which you would like Flexible Calling disabled.

4Click Submit.

Flexible Calling Codes Each Flexible Calling feature (that is, Conference, Transfer, Drop and Message Service) has a code associated with it that allows that particular feature to be enabled or disabled. By default these features are all enabled. The value displayed is the code required for this service to work between the ISDN LAN Modem and your telephone company. It is recommended that you leave the defaults set to the standard, national values.

To change these values, do the following.

1Go to the ISDN LAN Modem’s main configuration page (http://3com.oc.lanmodem/).

2Click ISDN Parameters.

3To disable a feature, next to Codes, enter 0 in the box to the right of the feature you want to disable. To change the values, enter the appropriate value (provided by your ISDN service provider) in the appropriate box.

4Click Submit.