3Com 3C892 manual From the Network group box, click Network Setup

40CHAPTER 4: SETTING UP TCP/IP FOR WINDOWS AND MACINTOSH

TCP/IP Setup Using If you are using Windows 3.11, a TCP/IP stack is not provided as part of the

Windows 3.11 operating system. If you do not have a TCP/IP stack, you can use MS TCP which is provided on the 3Com Companion Programs CD-ROM.

Setting Up TCP/IP Using To set up MS_TCP, do the following.

MS TCP

1Install MS_TCP, located on the 3Com Companion Programs CD-ROM, onto your hard drive.

2From the Program Manager, click Network.

Figure 31 Program Manager Group Box

3From the Network group box, click Network Setup.

Figure 32 Network Group Box

4From the Network Setup dialog box, click the Drivers button.

5From the Network Drivers dialog box, click Add Protocol.

6Select Unlisted or Update Protocol and then click OK.

7From the Install Driver dialog box, enter the path to the MS TCP directory.

For example, if you installed MS TCP on your C: drive in a directory called MSTCP, you would enter C:\MSTCP.

8Select MS TCP/IP-32.X and then click OK to install. The protocol is added to the list as shown in Figure 33.