62CHAPTER 6: ADVANCED CONFIGURATION
3In the Name field, enter a name for this remote destination, such as the name of the location of the office. You may want to add an additional description if you have more than one account with this private network.
4In the Telephone Number 1 field, enter the telephone number you must dial in order to reach this remote office.
5In the Alternate Number field, you can either enter an alternative number or, if required by this private network, a second telephone number to establish a Multilink PPP call.
To enter a second, alternative telephone number for this private network that will be automatically dialed (if, for example the first number is busy) select Alternate and then enter the telephone number in the Number field.
If your private network requires that you dial two telephone numbers to establish a Multilink PPP call, select Multilink from the
6Under Security, enter your User ID and password.
7Under DNS IP Address(es), if this private network uses static IP addresses (that is, these IP addresses are not supplied when a
8Specify Bandwidth Allocation.
■Use one B channel: When selected, one B channel is used to connect to this service provider.
■Add second B channel as required: When selected, the second B channel is added when the first B channel reaches a certain threshold. The threshold default is 60%. To change the threshold default, refer to “Changing Data Call Parameters.” The second B channel is temporarily removed when you place or answer another call.
■Use two B channels: When selected, both B channels are used to connect to this service provider (that is, always use Multilink PPP). Note that this prevents another call, data or voice to be placed or received as there is no available bandwidth (that is, the second B channel cannot be temporarily removed).
9Under Private Network Parameters, enter the IP address, subnet mask and domain name of the private network. You must enter an IP address and subnet mask.
10Under Miscellaneous, if you want to be able to access the Internet from this private network, select the Yes, I want to access the Internet radio button. Otherwise, select the No radio button.
11Under Miscellaneous, specify the B channel rate or select TollMizer.
Leave the B channel rate set to 64 Kbps unless your telephone company and the locations to which you will be connecting require 56 Kbps.
TollMizer makes a 56 Kbps data call over a voice circuit, allowing you to save the typical cost difference between a voice and data call. Note that the destination you are calling must also support this feature (also referred to as Switched 56 Permissive or Data Over Voice). Check with your telephone company and ISP to make sure that they support TollMizer.
