3Com 3C892 manual Using Rubber Feet and Stacking Clips, Using Stacking Clips

32CHAPTER 3: HARDWARE DESCRIPTION AND INSTALLATION

WARNING: Only wall mount single units. Do not wall mount stacked OfficeConnect units.

Using Rubber Feet and Stacking Clips

Attach the feet to the marked areas at each corner of the underside of your ISDN LAN

Modem to stabilize your ISDN LAN Modem and prevent sliding.

Use the four clips to stack OfficeConnect units together. You can stack up to four units. Stack small units above large units.

1.Place your existing unit on a flat surface. Your clips fit in these positions on the side of the unit.

2.Position a clip over one of these holes and push it until it clicks into place. Repeat this for the other clip position on the same side.

3.Keeping the front of the units aligned, rest the bottom of the new unit on the clips’ spikes. Push the clips firmly into the new unit until they click into place.

Small unit Use these holes

Large unit Use these holes

Spike

Figure 18 Using Stacking Clips